Potable Drinking Water Transport
The tank body is made of food-grade stainless steel, which is used for drinking water of residents.
Also called Drinking water truck, Drinking water delivery truck, Drinking water transport truck, Drinking water cart.
¥175,900.00
Description
Main Features
- Potable Water Truck equipped with gasoline pump
- The tank body is fully automatic welded, which is beautiful and firm
- The strengthening hoop on the tank body increases the shipping strength of the tank body
Optional Size & Features
- 5000L, 5 cbm
- 10,000L, 10 cbm
- 15,000L, 15 cbm
- 20,000L, 20 cbm
- 25,000L, 25 cbm
Specification
| Tank Barrel | |
| Tank Profile | Round shape |
| Test Pressure | Hydrostatic test to5 psi (35 Kpa) on each compartment |
| Working Pressure | Atmospheric |
| Capacity | 10000L plus 3~5% ullage |
| Compartments | Single compartment |
| Interior Weld Finish | Not polished or grinded (W-0) |
| Exterior Weld Finish | Not polished or grinded (W-0) |
| Shell Material | Stainless steel 304 2B, 3.7mm nominal |
| End Plate | Stainless steel 304 2B, 3.7mm nominal |
| All single heads dished and flanged | |
| Bulkhead | Nil |
| Baffle / Surge Heads | Stainless steel 304 2B, 3.7mm nominal |
| Dished with flap | |
| 2 pcs | |
| Spill Molding and Rollover Protection | Stainless steel around the dome with drain hose |
| Spill Molding Lids | Nil |
| Outer Rings | 304-2B stainless steel, 60mm height, 3mm nominal, continuously welded |
| Frame | Carbon steel independent |
| Loaders & Brackets | Carbon steel |
| Isolation | Nil |
| Exterior Lining | Nil |
| Tank Fittings & Piping | |
| Manholes | 20" diameter with 6 stainless steel wing nuts, located at the top center |
| Pressure Vacuum Vent | Two per compartment. 6~12 kPa pressure, 2~4 kPa vacuum |
| Foot Valve | Nil |
| Discharge System | 3" diameter discharge with 3" diameter butterfly valve, 3" stainless steel male camlock coupling and quick cap, located at the back of the tank |
| Piping | Nil |
| Thermometer | Nil |
| Steam Trace | Nil |
| Overfill Prevention | Nil |
| Tow Hook | Nil |
| Product Indicators | Nil |
| Accessories | |
| Ladder | Stainless steel, 400mm wide, with non skid rungs and lateral handles, mounted at right middle of tanker |
| Walkway | Extruded aluminium around dome |
| Hose Carries | 1 no, hose carrier (round tubes) to fit ®159 x meter (236") hose close type complete with brackets to be installed at the right side |
| Hose | Firemen type flexible discharge hoses, 30m 2.5" for discharge, and flexible plastics suction hoses, 5.9m 3"for suction, 3" female camlock coupling at both ends |
| Motor Pump | BRIGGS & STRATTON Gasoline motor, 4 stroke motor, fuel tank capacity 4.0 liters of gasoline, WB30 pump with a 3" input and outlet diameter, 7m suction head, discharge capacity 900L/min (238Gal/min) pump head pressure 33m, weight 30 kg |
| Toolbox | Nil |
| Rear Bumper | Aluminium member to accommodate light assembly and number plate to cover full width of the tank |
| Steel bumper with ground clearance 500mm approx | |
| Hazchem Plate | Nil |
| Mudguard | Aluminum over suspension and the upper coupler |
| Mud flaps rigid plastic at the rear | |
| Lights & Wiring | 24V. ISO 1185 7 pin socket |
| Harness: oil and vapour proof cable | |
| Front: nil | |
| Side | |
| Mark lamp 3pcs/side, LED | |
| Reflector 3pcs/side | |
| Turning lamp 1pc/side, LED | |
| Rear bump | |
| Reverse lamp R-L 2pcs, LED | |
| Turning lamp R-L 2pcs, LED | |
| Brake lamp R-L 2pcs, LED | |
| Register plate light | |
| Rear top: nil | |
| Brand of wiring | |
| Reverse Alarm | Nil |
| Connector Box | At the center in the front dishend |
| Sticker | 50mm wide red-white reflective sticker, mounted at both sides and rear bump |
| Hand Rail | Nil |
| Fire Extinguisher | 8 kg , 2pcs. |
| Carbon steel extinguisher holder located on the landing gear on the curb side | |
| Drains Hose | Water drains hose 2", installed at the back of spill molding |
| Wheel Chocks | Nil |
| Traffic Cone | Nil |
| Spare Wheel Bracket | 1 set, carbon steel, basket type, located behind the landing gear |
| Painting | Polyurethane medium aluminium gray, applied over epoxy primer on carbon steel elements |