Fire Fighting Truck
Fire fighting truck is used in urban public security fire brigade, petrochemical industry, factories, mining enterprises, communities, forests, ports, docks and other departments can quickly approach the fire scene to start fire fighting and put out various fires.
Also called Fire truck, Fire fighting tanker, Water tank fire truck, Fire extinguishing truck, Fire fighting vehicle, Foam fire fighter truck, Powder fire vehicle, Pickup fire pumper, Fire tender, Fire engine, Rescue fire equipment.
¥194,800.00
Description
Main Features
- The volume of the tank is 3 Cubic meters (3 tons), equipped with domestic well-known brands CB10/20 fire pumps, PS20 fire water cannons, with a range of more than 48 meters
Optional Size & Features
- 2 to 16 cbm
Specification
| Liquid Tank | |
| Carrier Volume | 4 cubic meters (announcement 3.38 square meters) |
| Material | Carbon steel (stainless steel or PP material can be selected as required) |
| Tank Fixing | Flexible connection with chassis frame |
| Manhole | 1 DN460 manhole with quick lock/open device |
| Water Inlet | There is a DN65 interface on the left and right sides of the water tank |
| Inlet & Outlet | 1 water tank to the water inlet pipe of the pump, DN100 valve, manual control, 1 water pump to the water tank filling pipe, DN65 valve, manual control |
| Drain | 1 DN40 water tank to put the remaining water port, with manual control of ball valve |
| Overflow | 1 DN65 overflow port |
| Fire Pump | |
| Model | CB10/20 type low-pressure vehicle fire pump |
| Form | Atmospheric centrifugal |
| Installation location | Rear |
| Flow | 20L/s @1.0MPa |
| Outlet Pressure | 1.0MPa |
| Maximum Suction Depth | 7m |
| Water Diversion Device | Built-in sliding vane pump |
| Diversion Time | Maximum suction depth ≤ 35s |
| Fire Cannon | |
| Model | PS20W |
| Flow | 20L/s |
| Rotation Angle | 360° horizontal rotation |
| Range | ≥ 48m |
| Maximum Elevation Angle | Elevation angle ≥ +60° |
| Maximum Depression Angle | Depression angle ≤ -15° |
| Power Take-off & Transmission System | |
| Structure Type | Sandwich mechanical transmission |
| Clutch Method | Hand control |
| Lubrication Method | Splash lubrication |
| Transmission System | Cross shaft universal joint drive shaft |
| Pipeline System | |
| Pipe Material | High-quality seamless steel pipe |
| Suction Pipe | There is a DN100 suction port on the back side of the pump room |
| Water Injection Line | There is a DN65 water injection port on the left and right sides of the water tank, and a DN65 water pump is installed in the pump room to inject water into the tank |
| Outlet Pipe | There is a DN80 water outlet on the left and right sides of the pump room, with a shut-off valve and a cover |
| Cooling Water Pipeline | Cooling water pipeline and control valve with cooling power take-off |
| Electrical Equipment | |
| Fireplace Lighting | 1 unit 35W fire searchlight installed at the rear |
| Strobe Light | Install red and blue strobe lights on both sides of the body |
| Warning Device | Install a long row of red warning lights on the top of the cab |
| Siren | The control box is in front of the driver's cab |
| Auxiliary Lighting | Firemen's room, pump room and equipment box are equipped with lights, and the control dashboard is equipped with bright and indicator lights |
| Additional Electrical | Set up an independent circuit |
| Ladder & Handle | |
| Ladder | Aluminum alloy two-section flip ladder, when used, it should not exceed 450mm from the ground |
| Get on The Car | Adopt anti-skid round steel pipe with groove on the surface, sprayed on the surface |
| Equipment Box & Pump Room | |
| Structure | The main frame structure is welded with high-quality square tube, and the outer decorative plate is welded with carbon steel plate |
| Equipment Box | The equipment box is located at the rear of the passenger compartment. The aluminum alloy rolling doors on both sides are equipped with lighting lamps. The equipment room is equipped with storage boxes according to needs |
| Pump Room | The pump room is located at the rear of the vehicle, with aluminum alloy rolling doors on both sides and the back, with lights inside, and some common equipment can be placed on both sides of the pump room |
